ZIP 20148 · Ashburn, VA · Loudoun County
Storm Damage Restoration in 20148Emergency Board Up Services & Storm Damage Water Extraction
Storm Damage Restoration for Ashburn properties includes storm flooded basement cleanup, debris removal after storm and storm damage water extraction.
Answered 24/7

Storm Damage Cleanup and Drying in 20148
Water from a storm can keep coming in after the rain stops, through a roof that is still open or a window that is still broken.
Storm Water Removal and Drying in 20148
Emergency Board Up Services
Board-up closes openings left by flying debris or a fallen limb, which keeps the next round of rain out of rooms already being dried.
Storm Damage Water Extraction
After a storm, water is extracted room by room with pumps and extractors, starting with the areas where it is deepest.
Wind-Driven Rain Drying
Wind-driven rain soaks the windward side of a house first. Drying focuses on those walls, the window sills and the carpet along them.
Wall Cavity Drying After Storms
When siding is torn or cracked in a storm, rain gets into the wall. The inside is dried while the outside is covered until it can be repaired.
Emergency Roof Tarping
When wind or a fallen branch opens the roof, a tarp is fastened over the damage as a stopgap until a roofer makes the repair.
How to Tell a Storm Let Water Inside
Dented Vents and Skylights
Hail dents on roof vents, skylight frames or flashing can leave gaps where water gets in during the next storm.
Musty Smell After Heavy Rain
A damp smell that was not there before the storm usually means wet insulation, carpet pad or wall cavities.
Mud or Debris Indoors
Mud, leaves or glass inside the house mean storm water came in from outside and floors need cleaning as well as drying.
Ceiling Stains After a Storm
New brown rings or damp spots on the ceiling after high wind or hail mean water is getting through the roof.
How Storm Damage Restoration Works in 20148
Step 1: Emergency Roof Tarping
Openings in the roof from wind or hail are tarped so the attic and ceilings stop taking on water.
Step 2: Hail Damage Leak Cleanup
Water in the attic is removed, wet insulation is pulled and ceilings below are checked for trapped water.
Step 3: Clean Surfaces
Floors and lower walls touched by outside water are cleaned and treated before drying to limit odor and contamination.
Step 4: Structural Drying
Dehumidifiers and air movers dry the attic, walls and floors, with readings taken each day until the targets are met.
Common Causes of Storm Damage in 20148
Flash Flooding
Sudden heavy rain can send water across yards and under doors faster than drains and gutters can carry it away.
Wind-Driven Rain
Strong winds push rain sideways into window frames, vents and siding joints that keep out normal rain.
Roof Damage From Wind
High winds lift and tear shingles and flashing, exposing the roof deck to rain that soaks into the attic.
Overflowing Gutters
Heavy rain can overflow clogged or undersized gutters, sending water down walls and toward the foundation.
Storm Damage Restoration for Homes and Businesses in 20148
Residential Storm Damage Restoration
For homeowners, the first job after a storm is stopping more water from getting in. Board-up and tarping come first, then extraction and drying.
Commercial Storm Damage Restoration
Property managers get moisture readings and photos for each affected unit or suite, which helps when several tenants and insurers are involved.
Storm Damage Restoration vs. DIY: When to Call Local Pros
Stay clear of downed power lines and do not enter rooms with standing water near outlets. Turn off power to wet areas only if you can reach the panel safely.
What Storm Damage Restoration Costs in 20148
Costs rise when water reaches the attic, walls and floors at once, because each level needs its own extraction and drying setup.
Timing of the Work
Work during or right after a storm, at night or on a weekend, can carry a higher rate than scheduled work.
Debris Inside
Mud, glass, branches and wet insulation inside the house take time to clear and dispose of.
Rooms Affected
Each wet room needs extraction, drying equipment and moisture checks, so the number of rooms sets much of the cost.
Does Insurance Cover Storm Damage Restoration?
Insurance may pay for board-up, tarping, extraction and drying after a covered storm. Your insurer decides what is covered, so check your policy and deductible.
Why Call Local Pros for Storm Damage Restoration in 20148
Hidden Water Found
Moisture meters and thermal cameras find water in walls, attics and under flooring that is not visible after a storm.
Records for Your Claim
Photos, readings and a list of removed materials give your adjuster a clear picture of the storm damage inside the house.
Homes and Businesses
The same steps apply to houses, condos, stores and offices, scaled to the size of the building and the damage.
Emergency Storm Damage Cleanup in 20148
A broken window or an open roof lets in more rain with every storm. Call (410) 862-3857 any time for board-up, tarping and drying in Ashburn.
Call Now (410) 862-3857Storm Damage Restoration Near 20148: Areas Served
Help with storm damage is available in Ashburn and nearby Leesburg, Reston and Centreville, with board-up, extraction and drying around the clock.
Your Storm Damage Restoration Questions Answered
How do the pros find water inside walls after a storm?
They use moisture meters and thermal cameras along exterior walls, under windows and in the attic to find water that is not visible.
What is storm damage restoration?
It is the work of securing a building after a storm, removing water and debris from inside and drying the structure. Roof, window and siding repairs are done by those trades.
How soon should storm cleanup start?
As soon as it is safe. Wet drywall, carpet and insulation can start to grow mold in 24 to 48 hours, and open roofs and windows let in more rain.
Is storm water dirty?
Rain coming through a roof is usually clean at first. Water that came in from outside across the ground is treated as dirty and needs cleaning as well as drying.
Can storm damage lead to mold?
It can if materials stay wet for a day or two. Prompt extraction, removal of soaked insulation and measured drying keep that from happening.